Company Registration No. 11397967 (England and Wales)
A & G METAL TREATMENTS LIMITED
UNAUDITED FINANCIAL STATEMENTS
FOR THE YEAR ENDED 30 JUNE 2020
PAGES FOR FILING WITH REGISTRAR
A & G METAL TREATMENTS LIMITED
CONTENTS
Page
Balance sheet
1 - 2
Notes to the financial statements
3 - 9
A & G METAL TREATMENTS LIMITED
BALANCE SHEET
AS AT
30 JUNE 2020
30 June 2020
- 1 -
2020
2019
Notes
£
£
£
£
Fixed assets
Intangible assets
3
4
4
Tangible assets
4
67,179
59,575
67,183
59,579
Current assets
Stocks
30,000
40,000
Debtors
5
232,460
216,265
Cash at bank and in hand
65,488
327,948
256,265
Creditors: amounts falling due within one year
6
(355,131)
(314,413)
Net current liabilities
(27,183)
(58,148)
Total assets less current liabilities
40,000
1,431
Provisions for liabilities
(4,143)
(753)
Net assets
35,857
678
Capital and reserves
Called up share capital
7
100
100
Profit and loss reserves
35,757
578
Total equity
35,857
678
The directors of the company have elected not to include a copy of the profit and loss account within the financial statements.
true
For the financial year ended 30 June 2020 the company was entitled to exemption from audit under section 477 of the Companies Act 2006 relating to small companies.
The directors acknowledge their responsibilities for complying with the requirements of the Companies Act 2006 with respect to accounting records and the preparation of financial statements.
T
he members have not required the company to obtain an audit of its financial statements for the year in question in accordance with section 476
.
These financial statements have been prepared and delivered in accordance with the provisions applicable to companies subject to the small companies regime.
A & G METAL TREATMENTS LIMITED
BALANCE SHEET (CONTINUED)
AS AT
30 JUNE 2020
30 June 2020
- 2 -
The financial statements were approved by the board of directors and authorised for issue on 7 June 2021 and are signed on its behalf by:
Mr A Pinder
Director
Company Registration No. 11397967
A & G METAL TREATMENTS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 30 JUNE 2020
- 3 -
1
Accounting policies
Company information
A & G Metal Treatments Limited is a
private
company
limited by shares
incorporated in England and Wales.
The registered office is
Charter House, Pittman Way, Fulwood, Preston, Lancashire, PR2 9ZD.
1.1
Accounting convention
These financial statements have been prepared in accordance with FRS 102 “The Financial Reporting Standard applicable in the UK and Republic of Ireland” (“FRS 102”) and the requirements of the Companies Act 2006 as applicable to companies subject to the small companies regime. The disclosure requirements of section 1A of FRS 102 have been applied other than where additional disclosure is required to show a true and fair view.
The financial statements are prepared in
sterling
, which is the functional currency of the company.
Monetary a
mounts
in these financial statements are
rounded to the nearest £.
The financial statements have been prepared under the historical cost convention. The principal accounting policies adopted are set out below.
1.2
Turnover
Turnover is recognised at the fair value of the consideration received or receivable for goods and services provided in the normal course of business
, and
is shown net of VAT and other sales related taxes
.
The fair value of consideration takes into account trade discounts, settlement discounts and volume rebates..
Revenue from the sale of goods is recognised when the significant risks and rewards of ownership of the goods have passed to the buyer
(usually on dispatch of the goods)
, the amount of revenue can be measured reliably, it is probable that the economic benefits associated with the transaction will flow to the entity and the costs incurred or to be incurred in respect of the transaction can be measured reliably.
1.3
Intangible fixed assets - goodwill
Goodwill represents the excess of the cost of acquisition of unincorporated businesses over the fair value of net assets acquired. It is initially recognised as an asset at cost and is subsequently measured at cost less accumulated
amortisation and accumulated impairment losses. Goodwill is considered to have a finite useful life and is amortised on a systematic basis over its expected life, which is 2 years.
For the purposes of impairment testing, goodwill is allocated to the cash-generating units expected to benefit from the acquisition. Cash-generating units to which goodwill has been allocated are tested for impairment at least annually, or more frequently when there is an indication that the unit may be impaired. If the recoverable amount of the cash-generating unit is less than the carrying amount of the unit, the impairment loss is allocated first to reduce the carrying amount of any goodwill allocated to the unit and then to the other assets of the unit pro-rata on the basis of the carrying amount of each asset in the unit.
1.4
Intangible fixed assets other than goodwill
Intangible assets acquired separately from a business are recognised at cost and are subsequently measured at cost less accumulated amortisation and accumulated impairment losses.
Intangible assets acquired on business combinations are recognised separately from goodwill at the acquisition date
where
it is probable that the expected future economic benefits that are attributable to the asset will flow to the entity and the
fair
value of the asset can be measured reliably; the intangible asset arises from contractual or other legal rights; and the intangible asset is separable from the entity.
A & G METAL TREATMENTS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 30 JUNE 2020
1
Accounting policies
(Continued)
- 4 -
Amortisation is recognised so as to write off the cost or valuation of assets less their residual values over their useful lives on the following bases:
Other intangibles
2 years Straight Line
1.5
Tangible fixed assets
Tangible fixed assets
are initially measured at cost and subsequently measured at cost or valuation, net of depreciation and any impairment losses.
Depreciation is recognised so as to write off the cost or valuation of assets less their residual values over their useful lives on the following bases:
Leasehold land and buildings
5% Straight Line
Plant and equipment
10% Reducing balance
Fixtures and fittings
25% Reducing balance
Computers
25% Straight Line
The gain or loss arising on the disposal of an asset is determined as the difference between the sale proceeds and the carrying value of the asset, and
is credited or charged to profit or loss
.
1.6
Impairment of fixed assets
At each reporting
period
end date, the
company
reviews the carrying amounts of its tangible
and intangible assets to determine whether there is any indication that those assets have suffered an impairment loss. If any such indication exists, the recoverable amount of the asset is estimated in order to determine the extent of the impairment loss (if any). Where it is not possible to estimate the recoverable amount of an individual asset, the company
estimates the recoverable amount of the cash-generating unit to which the asset belongs.
Recoverable amount is the higher of fair value less costs to sell and value in use. In assessing value in use, the estimated future cash flows are discounted to their present value using a pre-tax discount rate that reflects current market assessments of the time value of money and the risks specific to the asset for which the estimates of future cash flows have not been adjusted.
If the recoverable amount of an asset (or cash-generating unit) is estimated to be less than its carrying amount, the carrying amount of the asset (or cash-generating unit) is reduced to its recoverable amount. An impairment loss is recognised immediately in profit or loss, unless the relevant asset is carried at a revalued amount, in which case the impairment loss is treated as a revaluation decrease.
Recognised impairment losses are reversed if, and only if, the reasons for the impairment loss have ceased to apply. Where an impairment loss subsequently reverses, the carrying amount of the asset (or cash-generating unit) is increased to the revised estimate of its recoverable amount, but so that the increased carrying amount does not exceed the carrying amount that would have been determined had no impairment loss been recognised for the asset (or cash-generating unit)
in
prior years. A reversal of an impairment loss is recognised immediately in profit or loss, unless the relevant asset is carried at a revalued amount, in which case the reversal of the impairment loss is treated as a revaluation increase.
1.7
Stocks
Stocks are stated at the lower of cost and estimated selling price less costs to complete and sell. Cost comprises direct materials and, where applicable, direct labour costs and those overheads that have been incurred in bringing the stocks to their present location and condition.
A & G METAL TREATMENTS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 30 JUNE 2020
1
Accounting policies
(Continued)
- 5 -
At each reporting date, an assessment is made for impairment. Any excess of the carrying amount of stocks over its estimated selling price less costs to complete and sell is recognised as an impairment loss in profit or loss. Reversals of impairment losses are also recognised in profit or loss.
1.8
Cash and cash equivalents
Cash at bank and in hand
are basic financial assets
and
include deposits held at call with banks
.
1.9
Financial instruments
The company has elected to apply the provisions of Section 11 ‘Basic Financial Instruments’ and Section 12 ‘Other Financial Instruments Issues’ of FRS 102 to all of its financial instruments.
Financial instruments are recognised in the company's balance sheet when the company becomes party to the contractual provisions of the instrument.
Financial assets and liabilities are offset
, with
the net amounts presented in the financial statements
,
when there is a legally enforceable right to set off the recognised amounts and there is an intention to settle on a net basis or to realise the asset and settle the liability simultaneously.
Basic financial assets
Basic financial assets, which include debtors and cash and bank balances, are initially measured at transaction price including transaction costs and are subsequently carried at amortised cost using the effective interest
method unless the arrangement constitutes a financing transaction, where the transaction is measured at the present value of the future receipts discounted at a market rate of interest.
Financial assets classified as receivable within one year are not amortised.
Classification of financial liabilities
Financial liabilities and equity instruments are classified according to the substance of the contractual arrangements entered into.
Basic financial liabilities
Basic financial liabilities, including creditors, bank loans, loans from
fellow group companies and preference shares that are classified as debt, are
initially recognised at transaction price unless the arrangement constitutes a
financing transaction, where the debt instrument is measured at the present value of
the future
paymen
ts discounted at a market rate of interest.
Financial liabilities classified as payable within one year are not amortised.
Debt instruments are subsequently carried at amortised cost, using the effective
interest rate method.
Trade creditors
are obligations to pay for goods or services that have been acquired
in the ordinary course of business from suppliers. A
m
ounts payable are classified as
current liabilities if payment is due within one year or less. If not, they are presented
as non-current liabilities. Trade creditors are recognised initially at transaction price
and subsequently measured at amortised cost using the effective interest method.
1.10
Equity instruments
Equity instruments issued by the company are recorded at the proceeds received, net of transaction costs. Dividends payable on equity instruments are recognised as liabilities once they are no longer at the discretion of the company.
1.11
Taxation
The tax expense represents the sum of the tax currently payable and deferred tax.
A & G METAL TREATMENTS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 30 JUNE 2020
1
Accounting policies
(Continued)
- 6 -
Current tax
The tax currently payable is based on taxable profit for the year. Taxable profit differs from net profit as reported in the profit and loss account because it excludes items of income or expense that are taxable or deductible in other years and it further excludes items that are never taxable or deductible. The
company’s
liability for current tax is calculated using tax rates that have been enacted or substantively enacted by the reporting end date.
Deferred tax
Deferred tax liabilities are generally recognised for all timing differences and deferred tax assets are recognised to the extent that it is probable that they will be recovered against the reversal of deferred tax liabilities or other future taxable profits. Such assets and liabilities are not recognised if the timing difference arises from goodwill or from the initial recognition of other assets and liabilities in a transaction that affects neither the tax profit nor the accounting profit.
The carrying amount of deferred tax assets is reviewed at each reporting end date and reduced to the extent that it is no longer probable that sufficient taxable profits will be available to allow all or part of the asset to be recovered. Deferred tax is calculated at the tax rates that are expected to apply in the period when the liability is settled or the asset is realised. Deferred tax is charged or credited in the profit and loss account, except when it relates to items charged or credited directly to equity, in which case the deferred tax is also dealt with in equity. Deferred tax assets and liabilities are offset when the
company
has a legally enforceable right to offset current tax assets and liabilities and the deferred tax assets and liabilities relate to taxes levied by the same tax authority.
1.12
Employee benefits
The costs of short-term employee benefits are recognised as a liability and an expense, unless those costs are required to be recognised as part of the cost of stock or fixed assets.
The cost of any unused holiday entitlement is recognised in the period in which the employee’s services are received.
Termination benefits are recognised immediately as an expense when the company is demonstrably committed to terminate the employment of an employee or to provide termination benefits.
1.13
Retirement benefits
Payments to defined contribution retirement benefit schemes are charged as an expense as they fall due.
1.14
Leases
Leases are classified as finance leases whenever the terms of the lease transfer substantially all the risks and rewards of ownership to the lessees. All other leases are classified as operating leases.
Assets held under finance leases are recognised as assets at the lower of the assets fair
value at the date of inception and the present value of the minimum lease payments. The related liability is included in the balance sheet as a finance lease obligation. Lease payments are treated as consisting of capital and interest elements. The interest is charged to profit or loss so as to produce a constant periodic rate of interest on the remaining balance of the liability.
Rentals payable under operating leases,
including
any lease incentives received, are charged to
profit or loss
on a straight line basis over the term of the relevant lease except where another more systematic basis is more representative of the time pattern in which economic benefits from the lease
s
asset are consumed.
A & G METAL TREATMENTS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 30 JUNE 2020
1
Accounting policies
(Continued)
- 7 -
1.15
Foreign exchange
Transactions in currencies other than pounds sterling are recorded at the rates of exchange prevailing at the dates of the transactions. At each reporting end date, monetary assets and liabilities that are denominated in foreign currencies are retranslated at the rates prevailing on the reporting end date. Gains and losses arising on translation
in the period
are included in profit or loss.
1.16
The financial statements have been prepared on a going concern basis. At the balance sheet date the company has net current liabilities of £27,183 after the inclusion of amounts owed to related parties of £283,975. T
he
directors are of the opinion that the company will continue in business in the
foreseeable future
with their continued support
.
2
Employees
The average monthly number of persons (including directors) employed by the company during the year was:
2020
2019
Number
Number
Total
18
18
3
Intangible fixed assets
Goodwill
Other intangibles
Total
£
£
£
Cost
At 1 July 2019 and 30 June 2020
1
3
4
Amortisation and impairment
At 1 July 2019 and 30 June 2020
Carrying amount
At 30 June 2020
1
3
4
At 30 June 2019
1
3
4
A & G METAL TREATMENTS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 30 JUNE 2020
- 8 -
4
Tangible fixed assets
Land and buildings
Plant and machinery etc
Total
£
£
£
Cost
At 1 July 2019
1
65,986
65,987
Additions
10,657
4,952
15,609
At 30 June 2020
10,658
70,938
81,596
Depreciation and impairment
At 1 July 2019
6,412
6,412
Depreciation charged in the year
533
7,472
8,005
At 30 June 2020
533
13,884
14,417
Carrying amount
At 30 June 2020
10,125
57,054
67,179
At 30 June 2019
1
59,574
59,575
5
Debtors
2020
2019
Amounts falling due within one year:
£
£
Trade debtors
140,331
206,176
Other debtors
92,129
10,089
232,460
216,265
6
Creditors: amounts falling due within one year
2020
2019
£
£
Bank loans and overdrafts
21,793
Trade creditors
14,845
39,115
Corporation tax
5,049
Other taxation and social security
43,214
29,640
Other creditors
292,023
223,865
355,131
314,413
A & G METAL TREATMENTS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 30 JUNE 2020
- 9 -
7
Called up share capital
2020
2019
£
£
Ordinary share capital
Issued and fully paid
100 Ordinary of £1 each
100
100