Company Registration No. 06099556 (England and Wales)
STEVE HALL CAD SERVICES LIMITED
UNAUDITED FINANCIAL STATEMENTS
FOR THE YEAR ENDED 30 APRIL 2019
PAGES FOR FILING WITH REGISTRAR
STEVE HALL CAD SERVICES LIMITED
COMPANY INFORMATION
Director
Mr S Hall
Secretary
Mr M O Wamsley
Company number
06099556
Registered office
19 Mount Vernon Drive
Bromsgrove
Worcestershire
B61 0BF
Accountants
Ormerod Rutter Limited
The Oakley
Kidderminster Road
Droitwich
Worcestershire
WR9 9AY
Bankers
Barclays Bank Plc
Leicester
LE87 2BB
STEVE HALL CAD SERVICES LIMITED
CONTENTS
Page
Accountants' report
1
Balance sheet
2 - 3
Notes to the financial statements
4 - 6
STEVE HALL CAD SERVICES LIMITED
ACCOUNTANTS' REPORT TO THE DIRECTOR ON THE PREPARATION OF THE UNAUDITED STATUTORY FINANCIAL STATEMENTS OF STEVE HALL CAD SERVICES LIMITED FOR THE YEAR ENDED 30 APRIL 2019
- 1 -
In order to assist you to fulfil your duties under the Companies Act 2006, we have prepared for your approval the financial statements of Steve Hall Cad Services Limited for the year ended 30 April 2019 which comprise, the balance sheet and the related notes from the company’s accounting records and from information and explanations you have given us.
As a practising member firm of the Institute of Chartered Accountants in England and Wales (ICAEW), we are subject to its ethical and other professional requirements which are detailed at http://www.icaew.com/en/members/regulations-standards-and-guidance
.
This report is made solely to the Board of Directors of Steve Hall Cad Services Limited, as a body, in accordance with
our
terms
of
engagement. Our work has been undertaken solely to prepare for your approval the financial statements of Steve Hall Cad Services Limited
and state those matters that we have agreed to state to the Board of Directors of Steve Hall Cad Services Limited, as a body, in this report in accordance with ICAEW Technical Release 07/16 AAF. To the fullest extent permitted by law, we do not accept or assume responsibility to anyone other than Steve Hall Cad Services Limited and its Board of Directors as a body, for
our work or for this report.
It is your duty to ensure that Steve Hall Cad Services Limited has kept adequate accounting records and to prepare statutory financial statements that give a true and fair view of the assets,
liabilities, financial position and profit of Steve Hall Cad Services Limited. You consider that Steve Hall Cad Services Limited is exempt from the statutory audit
requirement for the year.
We have not been instructed to carry out an audit or a review of the financial statements of Steve Hall Cad Services Limited. For this reason, we have not verified the accuracy or completeness of the
accounting records or information and explanations you have given to us and we do not, therefore, express any opinion on the statutory financial statements.
Ormerod Rutter Limited
6 January 2020
Chartered Accountants
The Oakley
Kidderminster Road
Droitwich
Worcestershire
WR9 9AY
STEVE HALL CAD SERVICES LIMITED
BALANCE SHEET
AS AT 30 APRIL 2019
30 April 2019
- 2 -
2019
2018
Notes
£
£
£
£
Fixed assets
Tangible assets
3
614
1,269
Current assets
Debtors
4
9,121
13,831
Cash at bank and in hand
10,273
5,438
19,394
19,269
Creditors: amounts falling due within one year
5
(13,056)
(16,357)
Net current assets
6,338
2,912
Total assets less current liabilities
6,952
4,181
Provisions for liabilities
6
(111)
(241)
Net assets
6,841
3,940
Capital and reserves
Called up share capital
7
100
100
Profit and loss reserves
6,741
3,840
Total equity
6,841
3,940
The director of the company has elected not to include a copy of the profit and loss account within the financial statements.
true
For the financial year ended 30 April 2019 the company was entitled to exemption from audit under section 477 of the Companies Act 2006 relating to small companies.
The director acknowledges his responsibilities for complying with the requirements of the Companies Act 2006 with respect to accounting records and the preparation of financial statements.
T
he members have not required the company to obtain an audit of its financial statements for the year in question in accordance with section 476
.
These financial statements have been prepared and delivered in accordance with the provisions applicable to companies subject to the small companies regime.
STEVE HALL CAD SERVICES LIMITED
BALANCE SHEET (CONTINUED)
AS AT 30 APRIL 2019
30 April 2019
- 3 -
The financial statements were approved and signed by the director and authorised for issue on 6 January 2020.
Mr S Hall
Director
Company Registration No. 06099556
STEVE HALL CAD SERVICES LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 30 APRIL 2019
- 4 -
1
Accounting policies
Company information
Steve Hall Cad Services Limited is a
private
company
limited by shares
incorporated in England and Wales.
The registered office is
19 Mount Vernon Drive, Bromsgrove, Worcestershire, B61 0BF.
1.1
Accounting convention
These financial statements have been prepared in accordance with FRS 102 “The Financial Reporting Standard applicable in the UK and Republic of Ireland” (“FRS 102”) and the requirements of the Companies Act 2006 as applicable to companies subject to the small companies regime. The disclosure requirements of section 1A of FRS 102 have been applied other than where additional disclosure is required to show a true and fair view.
The financial statements have been prepared under the historical cost convention. The principal accounting policies adopted are set out below.
1.2
Turnover
Turnover is recognised at the fair value of the consideration received or receivable for services provided in the normal course of business
, and
is shown net of VAT
.
Revenue from the provision of services is recognised by reference to the stage of completion, when the costs incurred and costs to complete can be estimated reliably.
1.3
Tangible fixed assets
Tangible fixed assets
are initially measured at cost and subsequently measured at cost or valuation, net of depreciation and any impairment losses.
Depreciation is recognised so as to write off the cost or valuation of assets less their residual values over their useful lives on the following bases:
Fixtures and fittings
25% on cost
Office and computer equipment
25% on cost
1.4
Taxation
The tax expense represents the sum of the tax currently payable and deferred tax.
Current tax
The tax currently payable is based on taxable profit for the year. Taxable profit differs from net profit as reported in the profit and loss account because it excludes items of income or expense that are taxable or deductible in other years and it further excludes items that are never taxable or deductible. The
company’s
liability for current tax is calculated using tax rates that have been enacted or substantively enacted by the reporting end date.
STEVE HALL CAD SERVICES LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 30 APRIL 2019
1
Accounting policies
(Continued)
- 5 -
Deferred tax
Deferred tax liabilities are generally recognised for all timing differences and deferred tax assets are recognised to the extent that it is probable that they will be recovered against the reversal of deferred tax liabilities or other future taxable profits. Such assets and liabilities are not recognised if the timing difference arises from goodwill or from the initial recognition of other assets and liabilities in a transaction that affects neither the tax profit nor the accounting profit.
The carrying amount of deferred tax assets is reviewed at each reporting end date and reduced to the extent that it is no longer probable that sufficient taxable profits will be available to allow all or part of the asset to be recovered. Deferred tax is calculated at the tax rates that are expected to apply in the period when the liability is settled or the asset is realised. Deferred tax is charged or credited in the profit and loss account, except when it relates to items charged or credited directly to equity, in which case the deferred tax is also dealt with in equity. Deferred tax assets and liabilities are offset when the
company
has a legally enforceable right to offset current tax assets and liabilities and the deferred tax assets and liabilities relate to taxes levied by the same tax authority.
1.5
Employee benefits
The cost of any unused holiday entitlement is recognised in the period in which the employee’s services are received.
2
Employees
The average monthly number of persons (including directors) employed by the company during the year was 2 (2018 - 2).
3
Tangible fixed assets
Fixtures and fittings
Office and computer equipment
Total
£
£
£
Cost
At 1 May 2018 and 30 April 2019
1,437
7,403
8,840
Depreciation and impairment
At 1 May 2018
1,436
6,135
7,571
Depreciation charged in the year
-
655
655
At 30 April 2019
1,436
6,790
8,226
Carrying amount
At 30 April 2019
1
613
614
At 30 April 2018
1
1,268
1,269
STEVE HALL CAD SERVICES LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 30 APRIL 2019
- 6 -
4
Debtors
2019
2018
Amounts falling due within one year:
£
£
Trade debtors
8,406
12,987
Other debtors
715
844
9,121
13,831
5
Creditors: amounts falling due within one year
2019
2018
£
£
Trade creditors
65
239
Corporation tax
6,002
7,564
Other taxation and social security
4,819
4,580
Other creditors
2,170
3,974
13,056
16,357
6
Provisions for liabilities
2019
2018
£
£
Deferred tax liabilities
111
241
7
Called up share capital
2019
2018
£
£
Ordinary share capital
Issued and fully paid
90 Ordinary A of £1 each
90
90
10 Ordinary B of £1 each
10
10
100
100
8
Ultimate controlling party
The ultimate controlling party is Mr S Hall.